Not too long ago I mentioned a customer had purchased one of the Fallkniven HK9 Cowry X knives. I made a point of mentioning it because not only is it at the upper range in price for a ‘production’ knife, but the Cowry X steel in a Damascus is something we don’t run across on a regular basis. The information I found left me pretty impressed and curious whether it was really all it claimed to be and was the Fallkniven HK9 Cowry X really worth the money. If you care to read my initial comments, here’s a link to that post: Fallkniven HK9Cx Wow!
Our friend Dave from Knife Leather Traditions was the customer and he’s been gracious enough to allow me share some of his emails to me regarding his impression so far. For those of you that have communicated with Dave by email, you know it’s always fun to ‘read him’ as he does a fantastic job putting his thoughts into words. I’ve posted some of his emails with only a minimal amount of editing of some info that might be of a personal nature. There will be additional installments, so to start it off , here ya go and thanks for sharing Dave!!
Fallkniven HK9 Cx Damascus
“………..it all started with a “Clean out and organize the garage” project early last month.
I spent a solid week going through every shelf and container, sorting, cleaning, organizing. I had a trash pile, a keeper pile, and a take to the local swap meet pile. At the end of the week the biggest pile went down to the local swap meet and I came home with $200 and pocket change, proving once again that anything will sell if it is priced cheap enough.
Then it was the guns and ammunition that I no longer use or “need”. That cleaned out a ton of space and brought in a few more dollars I didn’t have previously.
After that you tried out the Fallkniven U2, which reminded me of how much I enjoy the three Fallknivens you got for me and how superior they are to anything I had in knives. I looked in the knife cabinet and decided I would really rather go with quality rather than quantity, and that was where the HK9cx came in as well as the U2……”
Two Days Later………
“It is here!!
I didn’t expect it until tomorrow so I never checked the mail until after afternoon.
This knife is so incredible, in so many ways, I don’t know where to begin. I will try to put down my initial thoughts on it either later tonight or tomorrow, but all I can say right now is that it is even more than I expected. This knife has to be taken in hand to be fully appreciated. The balance and “feel” is amazing.
It would be a total shame not to use and enjoy such a knife, which I fully intend to do.
Even if one could not afford the HK9cx, the HK9 in 3g steel would be one heck of a working knife and a knife that would last a lifetime. I will add more later but I just wanted to let you know it is here and I am more than impressed.”
Two HOURS later……
You are right. I have been carrying it and handling it all evening and it just gets better. I too am glad they did not try to make a $2.00 whore out of it with paint and pimping. It is as it should be, an honest working knife for someone who appreciates such a thing. There is so much to say about this knife I really don’t know where to begin. The only sad thing is: why didn’t you and I have such a knife available when we were both in the hunting stage of our lives? Wouldn’t it be fun to use it on game? Even so, it is going to be one heck of an all around camp and trail knife. I can’t wait to take it out.
When I first held this knife I was reminded of a favorite knife I got back in 1966 or so, just after I got out of the Army and was working on the old Milwaukee Road out of Montevideo, MN. I got the knife from Eddie Bauer, back when Eddie Bauer sold real outdoor equipment and when you wanted “the best” you got out the Eddie Bauer catalog. The best goose down parka I ever owned came from Eddie Bauer at the time.
Anyway, the knife was a part of a series made especially for Eddie Bauer by Gerber, again, back when Gerber was producing first class knives using some really good tool steels. Al Mar was working at Gerber then, before he went on his own, and I used to correspond with Al, a gentleman of the first order and a really swell guy. I always wanted to meet him but unfortunately never got the chance. The knife had a 3/16″ thick blade, like the HK9, and also like the HK9 was ground to a fine working edge. I don’t recall the blade steel but I do remember it was very hard, took and held a beautiful edge. It was a substantial knife and made to be used. Had a Stag handle and a butt cap. Perhaps you remember the series. The sheath was one of the best and well designed leather sheaths I have ever seen. Just one heck of a knife. I used that knife in the woods a lot and really enjoyed it. For one reason or another I let it go and I always wished I had it back. The HK9 reminds me of that favorite knife and brings back a lot of good memories.
This is just one very incredible knife!! I don’t know what else to say…………
Did you happen to notice that you can see the strip of Cowry X steel sandwiched in the center of the blade along the spine and tang? It is quite thin but adequate for the edge, pretty much no matter how you sharpen it. Interesting to be able to see it. And as you know, it is shaving sharp right out of the box!”
Two Days Later…..
I am impressed with the sheath. Probably the first thing I tend to look at in a sheath knife.
Very well made for a “factory” sheath. Good quality, heavy leather, well designed, and the knife locks in solid with no danger of falling out. I find it very serviceable and I am not intending on replacing it. I just finished sealing and burnishing the raw edges and will put my usual wax finish on it, but other than proper hand stitching I could not improve on it too much. For me that is saying a lot. I am very pleased with this sheath.
At first I thought the knife was “heavy”, but in use and practice it is not. Instead it is very well balanced so that only wrist action, combined with the natural balance and weight of the knife, does the work with a minimum of additional effort. The knife practically works by itself so to speak. A lot of thought and design went into it no doubt.
I tend to choke up on my sheath knives when slicing or fine cutting, laying my thumb and forefinger on either side of the blade just ahead of the guard, as in holding a chef knife. This puts the end of the handle on the HK9 right up against the heel of my hand, just where it should be. Therefore, the handle is correct, even for my size large hands. The knife just seems to lay naturally in the hand and seems comfortable in any position held. An extension of my hand rather than a separate object. Pretty impressive really.
I am having a lot of fun with this…………..”
I have no doubt we’ll hear again from Dave. I’m particularly interested to hear what he has to say about the quality of the blade steel once he gets a chance to really use the knife in the field. The Fallkniven HK9 Cowry X has a great reputation but it’s always good to get some feedback from someone you know and trust with first hand experience. Thanks again Dave!